Axis Swivel Table Stand Assembly

The axis swivel stand can be mounted to either a smooth surface using the supplied suctions cups or directly to a podium or lectern with non-supplied screws.


axis_diagram_top500 axis_diagram_back500

 Mounting Suction Cups

1) Take the base off the unit, and the finger screws. Put each screw in the base of the unit or table mounts.


2) Take the suction cups and thread them on the screws. Turning the suction cups clockwise, tighten them on the screw.

axis_assembly02_suction axis_assembly03_suction

3) Do this for each suction cup and screw. Make sure both the suction cup and the screw is tight.

Screen Shot 2013-11-25 at 11.38.16 AM